In modern mechanical processing field, commonly use emulsion or cooling oil as coolant, which produce massive oil mist and fume, influence factory production environment, damage employees health. TS oil mist filter solves above problems effectively, is a high quality oil mist filter, according with international occupational health and safety (OSHA & NIOSH) standard.

Reduce the impact on staff health:

0.3～3.5μm oil mist particles could remain in the body, on the health hazards.

Reduce work accidents:

Oil mist deposition to the work area, floors, walkways, slippery, easy to create wrestling accident.

Reduce fire risks:

Oil deposited on the walls, ceilings, equipment,forms potential fire hazard.

Reduce the consumption of coolant:

Oil mist through recovery can be reused, reduce economic costs on cooling fluid.

TS series oil mist cleaner (filter) technical description

TS series oil mist cleaner using centrifugal separation and efficient filter technology, under the function of fan, oil mist and waste gas is sucked into oil mist cleaner of machine, firstly through air register set, then went into the first level filter device, 20 μ m above oil mist particles removal, after that into centrifugal separation system, under powerful centrifugal force from high speed rotating impeller function, 3 μ m above oil mist particles removal from exhaust gases, backflow to oil pan and finally into efficient filter, lastly filter out 0.3μ m class oil mist by high efficiency particulate air filter. Oil mist and flue gas can be effectively collected, efficiency of 99% (DOP Method) above. TS series oil mist cleaner is an ideal equipment for oil mist and waste gas recycling treatment.

Applications:

Can be used for cutting oil, emulsion and synthetic coolant mist generated in the processing and water mist.

Applications:

CNC lathe, machine tools, washing machines, cylindrical, surface grinding, hobbing, milling and
slotting machines, vacuum pumps, spray test chamber, EDM, CNC machining center.

Order  details:

Closed cavity: cavity volume (m3) * factor (4/min) = air volume,is required: (L * W * H) * function coefficient of (4/min) = air volume required. Example: CNC lathe cavity dimensions: length 1.1m width 1.05m high lm [1.1 * 1.05 * 1] * 4 = 4.6M3/min Method, according to the calculated amount of wind-style selection of TS-400 is most appropriate.

Features:

High efficiency and energy saving, oil mist purification efficiency more than 99%.

The plug-in installation, easy maintenance.

Slight vibration, low noise, less than 65 dB (A).

Open phase protection, overheating protection, no exposed power, safe and reliable.

Widely used for water-soluble, oily mist-like material collection and purification.

Particle size(μm)

Param